Symphony Roar V44 Dead & Frp Removed Customer Care Signed Firmware
How to Flash Scatter Rom:
Step 1: Download And Extract With Winrar The Stock Rom On Your Computer.
Step 2: After Extracting You Will Find The Firmware File, SP Flash Tool, Driver And Instruction Manual.
Step 3: Install The USB Drivers.Skip If Drivers Are Already Installed On Your Computer.
Step 4: Open The SP Flash Tools And Load The Scatter File From The Firmware Folder.
Step 5: Connect Your Smartphone To The Computer Using The USB Cable.
Step 6: Click On Upgrade Or Download Button In The SP Flash Tool To Begin The Flashing.
Step 7: Green Sign Will Appear At The Screen And Device Will Successful Flash
Step 1: Download And Extract With Winrar The Stock Rom On Your Computer.
Step 2: After Extracting You Will Find The Firmware File, SP Flash Tool, Driver And Instruction Manual.
Step 3: Install The USB Drivers.Skip If Drivers Are Already Installed On Your Computer.
Step 4: Open The SP Flash Tools And Load The Scatter File From The Firmware Folder.
Step 5: Connect Your Smartphone To The Computer Using The USB Cable.
Step 6: Click On Upgrade Or Download Button In The SP Flash Tool To Begin The Flashing.
Step 7: Green Sign Will Appear At The Screen And Device Will Successful Flash
READ BY NCK TOOL
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x454534454134
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 70010045453445 : 000000000000000000
EMMC UA SIZE: 0xe2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe2480000 [3.536 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM7)
Detected partitions count: 26
Start dumping flash, this can take up to 1 hour.......
Start procesing proinfo ......
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start procesing nvram ......
Reading: BEGIN: 0x380000 - LEN: 0x500000
Start procesing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start procesing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start procesing lk ......
Start procesing lk2 ......
Start procesing boot ......
Reading: BEGIN: 0x1d80000 - LEN: 0x1000000
Start procesing recovery ......
Reading: BEGIN: 0x2d80000 - LEN: 0x1000000
Start procesing logo ......
Start procesing odmdtbo ......
Reading: BEGIN: 0x4600000 - LEN: 0x1000000
Start procesing vendor ......
Reading: BEGIN: 0x6000000 - LEN: 0x12000000
Start procesing frp ......
Reading: BEGIN: 0x18000000 - LEN: 0x100000
Start procesing tee1 ......
Reading: BEGIN: 0x18100000 - LEN: 0x500000
Start procesing tee2 ......
Reading: BEGIN: 0x18600000 - LEN: 0x500000
Start procesing nvdata ......
Reading: BEGIN: 0x18b00000 - LEN: 0x2000000
Start procesing metadata ......
Reading: BEGIN: 0x1ab00000 - LEN: 0x2500000
Start procesing oemkeystore ......
Reading: BEGIN: 0x1d000000 - LEN: 0x200000
Start procesing secro ......
Reading: BEGIN: 0x1d200000 - LEN: 0x600000
Start procesing keystore ......
Reading: BEGIN: 0x1d800000 - LEN: 0x800000
Start procesing system ......
Reading: BEGIN: 0x1e000000 - LEN: 0x4c800000
Backup cache disabled, we will skip it....
Backup userdata disabled, we will skip it....
Saved to : C:\Users\User\Documents\Android_MTK\firmware_backup\0-By CPU_MT6580_08_11_2018_20_11_24
Wait untill phone will start charging.
All done.
Version: V44_HW1_V9
Symp
No comments:
Post a Comment